Your Ice Maker Won’t Make Ice
Most modern-day fridges have an automatic ice maker. Gone are the days while we're required to use ice trays or buy bags of ice from the store each week. We’ve come to depend on our ice maker, so it’s disconcerting when we all at once see that our ice maker won’t make ice.
Here are the most commonplace problems we see:
Freezer Temperature Too High
The freezer temperature must be set between 0-5 degrees Fahrenheit. If the freezer is jogging too high, your ice maker won’t make ice.
You can test your freezer temperature with a easy thermometer placed within the freezer for 5 minutes. If you discover your freezer temperature is better than 5 tiers F, look into a bit further.
First, take a look at to make sure the condenser coils are freed from particles and dirt. If they’re dirty, get a damp rag and easy them. If this doesn’t do the trick within an afternoon or two, test the evaporator coils to look if they’re frosted over. If they've accumulated an excessive amount of frost, the refrigerator defrost cycle might not be working properly. If so, call an authorized technician to service your fridge and get it running efficiently. Manitowoc ice machine replacement parts
Water Filter Clogged
A smooth water filter maintains proper water drift and guarantees water quality. If your water filter gets clogged and does not allow enough water to drift to the ice dispenser, it will impact the performance of your ice maker. Inadequate water waft method our ice maker won’t produce ice. Water filters should be replaced at the least every 6 months. Check the date on your modern-day filter. If it’s old, update it.
Defective Ice Maker Thermostat
The ice maker thermostat monitors the temperature within the ice maker. If the defrost thermostat is malfunctioning, your ice maker won’t produce ice. To test the thermostat, use a multimeter to test for continuity. If the ice maker thermostat doesn’t have continuity, the thermostat is defective and wishes to be replaced. Scotsman Ice Machine Parts
Faulty Ice Maker Assembly Component
It is very not unusual for the ice maker assembly to malfunction. The person components to the ice maker meeting paintings together, and if any of the ice maker assembly additives are faulty and now not work, the ice maker assembly needs to be replaced.
Inadequate Water Pressure
The water inlet valve opens to permit water to go with the flow to the ice maker and water dispenser. This valve requires a minimum of 20 psi so one can feature properly. If your water strain is to low, the valve will now not open properly, limiting or getting rid of the go with the flow of water in your dispenser.
If the water strain is sufficient, use a multimeter to check if the water inlet valve has non-stop power. If there's an interruption in power, update the water inlet valve. Ice Machine Scotsman Parts
You’ve completed your homework, you’ve checked what you can, and nonetheless your ice maker won’t make ice. Schedule an appointment with a certified technician to diagnose the problem and repair it. It can be money well invested.